REPAIR / ESTIMATE POLICY:
Each piece of equipment is subject to a flat $90 estimate fee charged up front. If you accept the estimate, 100% of the fee goes towards the work order. If you decline the estimate, your equipment will be held for pickup unassembled (additional labor charge would apply to reassemble broken equipment to pre-estimate condition).
We Repair
Trash Pumps
Check engine, check suction, repair/service as needed to achieve -21HG+
Water Hose
Check for leaks & damage, cut & recouple as needed.
Air Hose
Check for leaks & damage, cut & recouple as needed.
Air Tools
Test ops / identify issue, completely disassemble for service and repair
CutOff Saws
Regular service or major repairs as needed / requested.
Plate Compactors
Check engine, check vibrator, belt, elements, repair/service as needed.
Rammers
The #1 under maintained piece of equipment.
25 hour break in service, other service and repairs as needed.
Blowers
Check motor, check blades, cord, switch, board, repair/replace as needed.
Gas Detectors
Calibrate, battery service, refurbishment, sensor replacements as needed.
Power Tools
Supported brands shipped out for warranty or non-warranty repairs under our Factory Repair program.
Tripods
Check all working components according to MFG specifications, repair/recert/ship out as required.
Winches
Check all working components according to MFG specifications, repair/recert/ship out as required.
Retractable Winches
Check all working components according to MFG specifications, repair/recert/ship out as required.
Floliners
Check all working components, clean, repair, replace, and recalibrate as needed.
Hydraulic Shores
Straighten rails, pressure test on custom hydraulic press, replace/repair seals and components as needed.
Shoring Pumps
Check for leaks, replace corroded or leaking parts, repair/service as needed to hold pressure with no leaks.
Supported Brands
Stemar repairs on supported brands are faster and more economical as we keep parts in stock and have distributor discounts on parts. Repairs for non-supported brands are still accepted on a case by case basis but customers should be aware that they may take longer and be more expensive than if taken to an official distributor.